Our consultants assist clients in all industries including packaging, post and telecommunications, built environment, manufacturing, tobacco, food  and beverage, clothing, information technology, Engineering and Mining organisations to implement complete solutions for their Occupational Safety, Health, Environmental and Quality Needs.
SHEQ CONSULTING If you are looking for fast turn around time, 100% accuracy and a lean management system that fits your business like a glove … we will be a great fit for you ! We offer 4 levels of service: 1. Our Premium Consulting Service is best suited to you if: You have little or no written management system procedures relevant to standards compliance or … You are not happy with your existing management system and want to start your documentation from scratch again (Often this is the safest and best way to guarantee your certification now and simplify compliance in the long-term) or … You are struggling to hold on to your certification or have had to let your certification go due to over complication but need certification to win work or … You are not confident you will get certified with your current system … or you have had your system prepared from a template. We will plan and manage your ISO implementation project leading to successful certification by: Performing an analysis of current systems/ documentation place Capacitating staff by performing basic awareness training sessions to suit the ISO system being implemented Implement new/ additional documentation / supporting evidence Implement improvements to the physical infrastructure to comply with the standard’s requirements Perform an Internal Audit Assist you to clear internal audit findings Prepare your Management Review report Assist you with the preparation for certification Assist you with clearance of any third part/ certification audit findings 2. Our Gap Analysis and Gap Filling service is best suited to you if: You are confident that you are 65-80% ready for certification in terms of documentation and implementation but … You need help identifying “how far you have to go” before applying for final certification and … You want help from an experienced expert to get you across the line        3. Our Readiness Review is best suited to you if: You are almost ready for certification in terms of documentation and implementation but … You want a final check or second opinion to confirm readiness for certification You are not quite confident and need to bounce ideas off a consultant 4. Our maintenance service is best suited to you if: You have good, comprehensive documentation/ policies and procedures that are in the advanced stages of implementation or the organization is already certified to ISO 9001, IATF 16949, ISO 14001, ISO 22000 and/ or FSSC 22000 and / or ISO 45001 Your organization wants to improve compliance with your own procedures You require an external auditor to conduct internal auditing. You require a maintenance of your existing systems, at planned sessions/ meeting dates to maintain compliance to ISO 9001, IATF 16949, ISO 14001, ISO 22000 and/ or FSSC 22000 and / or ISO 45001 SABS MARK If you are a manufacturer or an importer of products and wish to have the product/ s approved for local consumption and at the same time comply to a national standard or international specification, then the application for SABS MARK SCHEME will suit you. The process is to: Determine the exact specification/ s the product has to comply with. You can visit the SABS website or call their offices to determine this Purchase the specification/ s required (included in your project fees) Use the SABS specification ‘GENERAL PERMIT CONDITIONS (G.P.C.)’ to begin the development of the documentation required for SABS MARK Approval Submit samples as per the specification to the SABS for Laboratory testing Implement the developed system documentation Conduct the internal audit and Management Review Undergo an on-site audit by the SABS The SABS Mark gives the assurance to the purchaser that the product meets the following: Safety (complies with all statutory requirements) Quality / fitness for purpose (meets an appropriate standard) Redress (SABS intervention on behalf of customers) Note: The SABS since September 2007, is converting all existing Mark logo's toward a single product certification Mark as shown below:   SANAS ACCREDITATION SANAS accreditation gives formal recognition that Laboratories, Certification Bodies, Inspection Bodies an Good Laboratory Practice (GLP) test facilities are competent to carry out specific tasks. Organization’s accredited by SANAS becomes a stakeholder in SANAS and are entitled to use the appropriate SANAS logo on the certificates they issue, their letterheads and promotional material. SANAS certificates and their accompanying schedules are a formal recognition that an organization is competent to perform specific tasks. SANAS is responsible for the accreditation of Medical Laboratories to ISO 15189:2007, Certification bodies to ISOIIEC 17021:2006, ISOIIEC 17024:2003 and 65:1996 (and the IAF interpretation thereof), and laboratories (testing and calibration) to ISOIIEC 17025:2005. Inspection Bodies are accredited to ISOIIEC 17020:1998 standards. GLP facilities are inspected for compliance to OECD GLP principles M- THEORY CONSULTING has successfully consulted to many companies in the medical and food industry in achieving certification to the various ISO 17000 standards.
Our consultants assist clients in all industries including packaging, post and telecommunications, built environment,  manufacturing, tobacco, food and beverage, clothing, information technology, Engineering and Mining organisations to implement complete solutions for their Occupational Safety, Health, Environmental and Quality Needs.
SHEQ CONSULTING If you are looking for fast turn around time, 100% accuracy and a lean management system that fits your business like a glove … we will be a great fit for you ! We offer 4 levels of service: 1. Our Premium Consulting Service is best suited to you if: You have little or no written management system procedures relevant to standards compliance or … You are not happy with your existing management system and want to start your documentation from scratch again (Often this is the safest and best way to guarantee your certification now and simplify compliance in the long-term) or … You are struggling to hold on to your certification or have had to let your certification go due to over complication but need certification to win work or … You are not confident you will get certified with your current system … or you have had your system prepared from a template. We will plan and manage your ISO implementation project leading to successful certification by: Performing an analysis of current systems/ documentation place Capacitating staff by performing basic awareness training sessions to suit the ISO system being implemented Implement new/ additional documentation / supporting evidence Implement improvements to the physical infrastructure to comply with the standard’s requirements Perform an Internal Audit Assist you to clear internal audit findings Prepare your Management Review report Assist you with the preparation for certification Assist you with clearance of any third part/ certification audit findings 2. Our Gap Analysis and Gap Filling service is best suited to you if: You are confident that you are 65-80% ready for certification in terms of documentation and implementation but … You need help identifying “how far you have to go” before applying for final certification and … You want help from an experienced expert to get you across the line        3. Our Readiness Review is best suited to you if: You are almost ready for certification in terms of documentation and implementation but … You want a final check or second opinion to confirm readiness for certification You are not quite confident and need to bounce ideas off a consultant 4. Our maintenance service is best suited to you if: You have good, comprehensive documentation/ policies and procedures that are in the advanced stages of implementation or the organization is already certified to ISO 9001, IATF 16949, ISO 14001, ISO 22000 and/ or FSSC 22000 and / or ISO 45001 Your organization wants to improve compliance with your own procedures You require an external auditor to conduct internal auditing. You require a maintenance of your existing systems, at planned sessions/ meeting dates to maintain compliance to ISO 9001, IATF 16949, ISO 14001, ISO 22000 and/ or FSSC 22000 and / or ISO 45001 SABS MARK If you are a manufacturer or an importer of products and wish to have the product/ s approved for local consumption and at the same time comply to a national standard or international specification, then the application for SABS MARK SCHEME will suit you. The process is to: Determine the exact specification/ s the product has to comply with. You can visit the SABS website or call their offices to determine this Purchase the specification/ s required (included in your project fees) Use the SABS specification ‘GENERAL PERMIT CONDITIONS (G.P.C.)’ to begin the development of the documentation required for SABS MARK Approval Submit samples as per the specification to the SABS for Laboratory testing Implement the developed system documentation Conduct the internal audit and Management Review Undergo an on-site audit by the SABS The SABS Mark gives the assurance to the purchaser that the product meets the following: Safety (complies with all statutory requirements) Quality / fitness for purpose (meets an appropriate standard) Redress (SABS intervention on behalf of customers) Note: The SABS since September 2007, is converting all existing Mark logo's toward a single product certification Mark as shown below:   SANAS ACCREDITATION SANAS accreditation gives formal recognition that Laboratories, Certification Bodies, Inspection Bodies and Good Laboratory Practice (GLP) test facilities are competent to carry out specific tasks. Organization’s accredited by SANAS becomes a stakeholder in SANAS and are entitled to use the appropriate SANAS logo on the certificates they issue, their letterheads and promotional material. SANAS certificates and their accompanying schedules are a formal recognition that an organization is competent to perform specific tasks. SANAS is responsible for the accreditation of Medical Laboratories to ISO 15189:2007, Certification bodies to ISOIIEC 17021:2006, ISOIIEC 17024:2003 and 65:1996 (and the IAF interpretation thereof), and laboratories (testing and calibration) to ISOIIEC 17025:2005. Inspection Bodies are accredited to ISOIIEC 17020:1998 standards. GLP facilities are inspected for compliance to OECD GLP principles M- THEORY CONSULTING has successfully consulted to many companies in the medical and food industry in achieving certification to the various ISO 17000 standards.
Our consultants assist clients in all industries  including packaging, post and  telecommunications, built environment,  manufacturing, tobacco, food and beverage,  clothing, information technology, Engineering  and Mining organisations to implement complete solutions for their Occupational Safety, Health, Environmental and Quality Needs.
SHEQ CONSULTING If you are looking for fast turn around time, 100% accuracy and a lean management system that fits your business like a glove … we will be a great fit for you ! We offer 4 levels of service: 1. Our Premium Consulting Service is best suited to you if: You have little or no written management system procedures relevant to standards compliance or … You are not happy with your existing management system and want to start your documentation from scratch again (Often this is the safest and best way to guarantee your certification now and simplify compliance in the long-term) or … You are struggling to hold on to your certification or have had to let your certification go due to over complication but need certification to win work or … You are not confident you will get certified with your current system … or you have had your system prepared from a template. We will plan and manage your ISO implementation project leading to successful certification by: Performing an analysis of current systems/ documentation place Capacitating staff by performing basic awareness training sessions to suit the ISO system being implemented Implement new/ additional documentation / supporting evidence Implement improvements to the physical infrastructure to comply with the standard’s requirements Perform an Internal Audit Assist you to clear internal audit findings Prepare your Management Review report Assist you with the preparation for certification Assist you with clearance of any third part/ certification audit findings 2. Our Gap Analysis and Gap Filling service is best suited to you if: You are confident that you are 65-80% ready for certification in terms of documentation and implementation but … You need help identifying “how far you have to go” before applying for final certification and … You want help from an experienced expert to get you across the line        3. Our Readiness Review is best suited to you if: You are almost ready for certification in terms of documentation and implementation but … You want a final check or second opinion to confirm readiness for certification You are not quite confident and need to bounce ideas off a consultant 4. Our maintenance service is best suited to you if: You have good, comprehensive documentation/ policies and procedures that are in the advanced stages of implementation or the organization is already certified to ISO 9001, IATF 16949, ISO 14001, ISO 22000 and/ or FSSC 22000 and / or ISO 45001 Your organization wants to improve compliance with your own procedures You require an external auditor to conduct internal auditing. You require a maintenance of your existing systems, at planned sessions/ meeting dates to maintain compliance to ISO 9001, IATF 16949, ISO 14001, ISO 22000 and/ or FSSC 22000 and / or  ISO 45001 SABS MARK If you are a manufacturer or an importer of products and wish to have the product/ s approved for local consumption and at the same time comply to a national standard or international specification, then the application for SABS MARK SCHEME will suit you. The process is to: Determine the exact specification/ s the product has to comply with. You can visit the SABS website or call their offices to determine this Purchase the specification/ s required (included in your project fees) Use the SABS specification ‘GENERAL PERMIT CONDITIONS (G.P.C.)’ to begin the development of the documentation required for SABS MARK Approval Submit samples as per the specification to the SABS for Laboratory testing Implement the developed system documentation Conduct the internal audit and Management Review Undergo an on-site audit by the SABS The SABS Mark gives the assurance to the purchaser that the product meets the following: Safety (complies with all statutory requirements) Quality / fitness for purpose (meets an appropriate standard) Redress (SABS intervention on behalf of customers) Note: The SABS since September 2007, is converting all existing Mark logo's toward a single product certification Mark as shown below:   SANAS ACCREDITATION SANAS accreditation gives formal recognition that Laboratories, Certification Bodies, Inspection Bodies and Good Laboratory Practice (GLP) test facilities are competent to carry out specific tasks. Organization’s accredited by SANAS becomes a stakeholder in SANAS and are entitled to use the appropriate SANAS logo on the certificates they issue, their letterheads and promotional material. SANAS certificates and their accompanying schedules are a formal recognition that an organization is competent to perform specific tasks. SANAS is responsible for the accreditation of Medical Laboratories to ISO 15189:2007, Certification bodies to ISOIIEC 17021:2006, ISOIIEC 17024:2003 and 65:1996 (and the IAF interpretation thereof), and laboratories (testing and calibration) to ISOIIEC 17025:2005. Inspection Bodies are accredited to ISOIIEC 17020:1998 standards. GLP facilities are inspected for compliance to OECD GLP principles M- THEORY CONSULTING has successfully consulted to many companies in the medical and food industry in achieving certification to the various ISO 17000 standards.